• +92- 316-4276667
  • info@tsint.com.pk
  • Tractor Equipment

    Tine Tiller

    Ideal for general cultivating, weeding, pasture renovating and preparing seedbeds..

    The tiller is available in 4 widths: 9, 11, 13 and 15 tines. The tiller is fully mounted on the tractor by means of Category I or II three point hitch pins.

    The spring-loaded tines swing back under break-away pressure of 163 Kg: pass over the obstruction and return to the working position without affecting the working depth of the implement..

    The continual flexing action of the tines shatters the soil breaking up the clods..

    The tiller is fitted with 51 mm reversible shovels which are designed for deep penetration..

    A working depth upto 229 mm is possible in most soils and is simply controlled while sitting on the tractor seat.

    Agricultural Loader

    A multipurpose rugged and powerful machine which can be quickly attached/detached to the front of Massey Ferguson

    Tractors for handling/loading stone/brick crush, garbage, sand, grains, wood loge etc. into a truck or trailer.


    Used for deep ploughing in root-infested, sticky, stony, and hard soils. Mixes remains of crops and weeds throughout the depth of ploughing, hence ideal for rain-fed areas for checking soil erosion by water and wind.

    Spring loaded floating rear furrow wheel controls the side draft to ensure straight work and ease of handling by smaller tractor.

    Re-greasable Taper Roller Bearings in disc hubs. angle adjustable to vary the penetration with varying soil conditions.

    Cat I & II linkage.

    Disc Scrapers are adjustable to ensure that the Discs remain clean in all conditions.

    Farm Trailer

    Farm trailer provides cost effective means of farm transportation.

    All steel body Robust construction trailers provide a selection of sizes from 3.5-12 Tons.


    The Power Dozers are designed and built to match the performance of the MT tractors.

    They are operated hydraulically by single or twin double acting rams.

    The points of attachment of the dozer to the tractor are reduced to an absolute minimum and the mounting brackets, once fitted, can be left in position enabling the sub-frame and blade to be quickly removed and attached.

    The blade is fitted with a reversible and replaceable cutting edge of high carbon steel.


    There are many jobs around the farm that often involve back breaking work and much effort-jobs like loading and unloading large drums of fuel, feed, seeds, fertilizer bags, building materials, machinery ad similar chores.

    The Jib Crane provides the answer to all these problems and they can all be handled with a minimum of effort from the seat of your tractor.

    Ruggedly constructed from tubular steel, the crane is capable of lifting a load upto 500 kg. The goose-neck design makes it particularly handy for loading and unloading trucks and trailers.

    Used almost daily on any farm.

    Simple – one minute attachment

    It is recommended that the stabiliser bar chain be used if transporting over rough ground. Height of lift adjustable.

    Maschion Lawn Mower

    Tractors Mounted PTO driven grass mower, suitable for Lawns, Sports areas and Public Gardens.

    Mould Board Plough

    The most important plough for primary tillage in canal irrigated or heavy rain areas where too much weeds grow.

    The objective or ploughing with a Mould Board is to completely invert and pulverize the soil, up-root all weeds, trash and crop residues and bury them under the soil.

    The shape of Mould Board is designed to cut down the soil and invert it to right side completely burying the undesired growth which is subsequently turned into manure after decomposition.

    Offset Disc Harrow

    The Offset Disc Harrow has a heavier weight per Disc and thus have the penetration ability to break down large clods normally left after disc ploughing or Chisel Ploughing in hard grounds. It is of robust construction, used as mounted or trailed and ideal for chopping and mixing of stubbles and crop residues in the soils.

    The Disc Harrow prepares the seed-bed leaving the soil in granular form which is the most suitable structure for plant growth. It aerates the soil, helps to conserve moisture for longer periods and eradicate weeds.

    In sandy loam soils, this implement can also be used as primary tillage implement. The depth of ploughing is regulated simply by manipulating the offset angles of the gauges. By removing simply a pin, the mounted position can be converted into trailed position and vice versa.

    Post Hole Digger

    Post Hole Digger is a PTO driven machine that digs holes in rows on equal distances mechanically and economically.

    Best suited for tree plantation.

    Also can be used for hole making for electric poles and farm hedges.

    It can dig about 90 cm deep hole of even diameter in just 30 seconds.

    By detaching Augers, it can be used as a small crane.


    Used for making ridges for planting tobacco, potato and other vegetables. The ridger is fully adjustable for giving different accurate row widths.

    To obtain the correct ridge profile and retain soil flow, the high grade mould boards are adjustable.

    The ridger can also be used for earthing up the crops sown in rows.

    Swinging Draw Bar

    Ideal gadget for towing any type of farm load including trailed implements, by attaching it to a tractor under center axle housing.

    Can be fitted to MF 240. MF 350, MF 260, MF 375, MF 385 and MF 385 4WD tractors. The swinging draw bar conforms with British Standard having a Clevis hitch point at 36 mm (14 inch) from the PTO shaft.

    The maximum static load for the drawbar is 771 kg (1700 Lb) with the draw bar in the outer position and 998 kg (2200 Lbs) in the inner position.

    The draw bar height is adjustable in relation to the PTO center line.